Cisco Training and Certification
Cisco Systems offers some of the most advanced technologies in the areas of routing, switching, network security and voice applications that require the expertise of trained professionals Cisco certifications are required for nearly all Cisco IT professionals. Whether you are new to Cisco technology or looking for an advanced training to prepare you for Cisco certifications such as CCNA, CCNP, CCSP, CCDP, CCIP or CCVP.
Course Description: Cisco Certified Network Associate Course includes the following: WAN technologies, implementing network security, types of networks and network media, routing and switching fundamentals, the TCP/IP and OSI models, IP addressing, operating and configuring IOS devices, extending switched networks with VLANs, determining IP routes, managing IP traffic with access lists, establishing point-to-point connections, and establishing Frame Relay connections.
Course Objectives: Providing the skills and knowledge necessary to install, operate, and troubleshoot a small to medium branch office Enterprise Network. Switch and router configuration, connecting to a WAN and implementing network security will be covered. Students should be able to complete configuration and implementation of a small branch office network under supervision. Students will also learn to configure, verify, and troubleshoot OSPF and EIGRP. The ability to apply ACLs based on network requirements, as well as configure, verify, and troubleshoot ACLs on a medium-sized network are key to this course. The ability to configure and judge between NAT and PAT for a medium-sized network will also be covered.
Lesson 1: Internetworking
Lesson 2: Introduction to TCP/IP
Lesson 3: Subnetting, Variable Length Subnet Masks (VLSMs), and Troubleshooting TCP/IP
Lesson 4: Cisco’s Internetworking Operating System (IOS) and Security Device Manager (SDM)
Lesson 5: Managing a Cisco Internetwork
Lesson 6: IP Routing
Lesson 7: Enhanced IGRP (EIGRP) and Open Shortest Path First (OSPF)
Lesson 8: Layer 2 Switching and Spanning Tree Protocol (STP)
Lesson 9: Virtual LANs (VLANs)
Lesson 10: Security
Lesson 11: Network Address Translation (NAT)
Lesson 12: Cisco’s Wireless Technologies
Lesson 13: Internet Protocol Version 6 (IPv6)
Lesson 14: Wide Area Networks
Duration : 2 months (2 Contact weekly)
Cisco Certified Network Professional (CCNP®) validates the ability to plan, implement, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security, voice, wireless and video solutions. Those who achieve CCNP have demonstrated the skills required in enterprise roles such as network technician, support engineer, systems engineer or network engineer.
642-902 ROUTE Implementing Cisco IP Routing (ROUTE)
The ROUTE 642-902 exam will certify that the successful candidate has the knowledge and skills necessary to use advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and WANs.
ROUTE v1.0 Outline: – Students will learn to plan, configure and verify the implementation of complex enterprise LAN and WAN routing solutions using a range of routing protocols. Course also covers configuration of secure routing solutions to support branch offices and mobile workers.
642-813 SWITCH Implementing Cisco IP Switched Networks (SWITCH)
Implementing Cisco IP Switched Networks (SWITCH 642-813) is a qualifying exam for the Cisco Certified Network Professional CCNP®, and Cisco Certified Design Professional CCDP® certifications. The SWITCH 642-813 exam will certify that the successful candidate has important knowledge and skills necessary to plan, configure and verify the implementation of complex enterprise switching solutions using Cisco’s Campus Enterprise Architecture. The SWITCH exam also covers secure integration of VLANs, WLANs, voice and video into campus networks.
SWITCH v1.0 Outline -Students will learn to plan, configure and verify the implementation of complex enterprise switching solutions using Cisco’s Campus Enterprise Architecture. Course also covers secure integration of VLANs, WLANs, voice and video into campus networks.
642-832 TSHOOT Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)
Troubleshooting and Maintaining Cisco IP Networks (TSHOOT 642-832) is a qualifying exam for the Cisco Certified Network Professional CCNP®, certification. The TSHOOT 642-832 exam will certify that the successful candidate has important knowledge and skills necessary to (1) plan and perform regular maintenance on complex enterprise routed and switched networks and (2) use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.
TSHOOT v1.0 Outline – Troubleshooting and Maintaining Cisco IP Networks Students will learn to (1) plan and perform regular maintenance on complex enterprise routed and switched networks and (2) use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting. Extensive labs provide for hands-on learning and reinforce troubleshooting skills.
The CCNP certification is appropriate for those for network engineers with at least one year of professional work experience, who are ready to advance their skills and work independently on complex network solutions or for people who already have CCNA or CCNA equivalent knowledge.
Duration : 1 month per module (3 Contact weekly)